Skip to main content

Free rescreen estimates  ·  Mon–Sat 7am–7pmPool cages & lanais in Gainesville and Alachua County  ·  Insured  ·  Fixed written prices

Pool cage repair Gainesville FL: crew in navy shirts rolling new charcoal screen into a mansard pool enclosure behind a brick ranch home

Pool Cage Repair in Gainesville, FL

Torn screens. Tired doors. One fixed price.

Full rescreens, single panels, lanai screens, doors and bent frames for screened pool enclosures across Gainesville. We tell you what your cage actually needs, write the price down, and leave the deck cleaner than we found it.

  • FreeOn-site estimates
  • WrittenFixed price first
  • 1 panelSmall jobs welcome
  • 12Neighborhoods & towns

Free rescreen estimate

Tell us what's torn, sagging or broken. A photo of the cage helps us price it faster.

Reply same day
Your details

  • No obligation
  • Insured
  • Old screen hauled away
Request received

We'll call you within one business day. If a storm left your cage open or a door won't latch around kids or pets, call (352) 443-5293 and we'll move you up.

Gainesville Pool Cage Rescreening, Panels & Repairs

From one torn panel to the whole cage.

Eight services for screened pools and lanais. Every job starts with a free on-site look, and the estimate is in writing before any work begins.

Gainesville pool cage estimate: estimator pressing on a faded screen panel to test it while a homeowner watches
On every estimateWe press-test the screen, check the spline, door, braces and kick plates, and go over each item on the price with you.

Pool Cage Repair Gainesville FL Homeowners Count On

A screen crew for a town full of screened pools.

Behind a lot of Gainesville homes sits an aluminum cage that keeps leaves out of the pool and bugs off the people. Florida sun, oak litter and summer storms wear that screen out long before the frame is done.

We come out, walk the cage with you and tell you plainly what it needs. Sometimes that’s a few replacement panels and a new door closer. Sometimes the whole enclosure is brittle and a full pool cage rescreen is the honest answer. If a repair can wait a season, we say so. Not sure where your cage stands? Our guide on whether to repair or rescreen walks through it.

  • Single-panel jobs welcome
  • Screen samples on site
  • Storm photos for insurance
  • Pool cages and lanais
Book a free estimate

Pool Enclosure Screen Types Compared for Gainesville Homes

Which screen goes where, and what it adds.

These are the screen types we install most. Prices are the typical add-on per panel over standard 18/14 charcoal, and plenty of cages use two or three types.

Standard 18/14

Charcoal vinyl-coated fiberglass

Wear resistance
Standard
Add-on per panel
Base price
Best place on the cage
Most walls and roof panels. Good view out, good airflow, the default on most Gainesville cages.
Trade-off
Tiny biting midges can get through the weave.

20/20 no-see-um

Tighter fiberglass weave

Wear resistance
Standard
Add-on per panel
+$15–$30
Best place on the cage
Cages where no-see-ums chase you inside at dawn and dusk.
Trade-off
Slightly darker, with a little less breeze.

Pet-resistant screen

Heavy vinyl-coated polyester

Wear resistance
High
Add-on per panel
+$25–$45
Best place on the cage
Lower panels and doors where dogs and cats push or claw.
Trade-off
Thicker yarn means a less clear view.

Solar / sun-control screen

Dense weave, often rated around 80–90%

Wear resistance
Standard
Add-on per panel
+$25–$45
Best place on the cage
West and south walls and lanais that bake in afternoon sun.
Trade-off
Darker inside and less airflow.

Privacy / debris screen

Tight, heavy weave sometimes called “Florida glass”

Wear resistance
High
Add-on per panel
+$20–$40
Best place on the cage
The bottom row of panels, to keep out blown dirt and leaves and block the view from a neighbor’s yard.
Trade-off
You can’t see out through it well.

Heavy-duty screen

Thicker vinyl-coated mesh

Wear resistance
High
Add-on per panel
+$25–$45
Best place on the cage
High-traffic walls, kids’ play areas and panels near a door.
Trade-off
Costs more and is less see-through than 18/14.

Product names vary by manufacturer, so we bring samples to the estimate and let you hold each one up to the light. More detail on each in our pool cage screen types guide.

Pool Screen Repair in Gainesville: Why North Florida Screens Fail

The frame lasts decades. The screen doesn’t.

An aluminum enclosure is built to stand for a long time. The vinyl-coated fiberglass stretched across it is the part that wears out, and in Alachua County it gets hit from four directions at once.

Sun on the south and west walls

Ultraviolet light breaks down the coating on the screen yarn and bakes the rubber spline that holds it in place. You see it first as a gray, chalky look on the walls that take afternoon sun, then as panels that split when you push on them. The shaded side of the same cage can look years younger. Picking the right screen for a hot wall helps the next set last.

Oak leaves, acorns and pine needles on the roof

Gainesville’s canopy is part of why people love living here, and it lands on pool cage roofs all year. Live oaks shed old leaves in spring, pines drop needles, and wet piles sit on the roof panels until they sag and stretch. A dropped branch can punch straight through.

Summer storms and hurricanes

Afternoon thunderstorms bring strong gusts most summers, and tropical systems add more. When Irma came through in 2017, Gainesville’s airport logged gusts up to 61 mph. Wind pushes on every panel like a sail, so loose screen rips and tired spline lets go. Storm damage repair covers screens, braces and doors together.

Dogs, cats and kids

Paws on the lower panels and a door that gets shoved open a hundred times a summer are the other big killers. Pet-resistant screen down low and a healthy screen door closer fix most of it.

How Our Gainesville Pool Cage Repair Works

From first photo to a tight cage.

No add-ons sprung on you mid-job. The number on your signed estimate is what you owe.

  • Send a photo

    Snap the whole cage plus the worst panels. Most photo requests get a rough range back within the day.

  • Free on-site estimate

    We check screen, spline, door, braces and kick plates, show you samples and write a fixed price.

  • Work day

    Pool deck protected, frame fixes first, then new screen rolled in panel by panel.

  • Cleanup and walk-through

    Old screen and spline hauled off, deck blown clean, door tested with you before we leave.

Pool Cage Rescreening Cost in Gainesville

Cage size drives the price. So does what’s broken.

A small single-story cage with a few torn panels and a tall mansard enclosure that needs new screen everywhere are very different jobs. These are typical Gainesville-area market ranges, not a quote. The exact figure comes from a free on-site estimate.

Want the long version? Read what it costs to rescreen a pool cage in Gainesville.

JobTypical Gainesville rangeWhat moves the price
Full pool cage rescreen$1,800–$5,500Square footage, roof style, two-story or mansard height
Single screen panel$65–$150Panel size, roof vs. wall, ladder height
Lanai or patio rescreen$1,200–$4,000Number of panels, doors, access through the house
Screen upgrade+$15–$45 / panelNo-see-um, pet, privacy or solar screen
Screen door repair
$125–$450
Closer, hinges, latch, kick plate or a full new door.
Cage frame repair
$250–$2,500
Bent beams, loose braces, gussets, gutters and kick plates.
Cage wash & repaint
$600–$3,000
Mildew washed off, chalky aluminum repainted.
Storm damage repair
Quoted on site
Photographed and written up for your insurer.
Read the cost guide

Gainesville Pool Cage Rescreening, Before and After

What a typical rescreen looks like.

A typical job here: a cage whose screen has gone gray and brittle, with a few roof panels split open and walls bowing in the wind. Every panel comes out, the channels are cleaned, and new screen goes on with fresh spline, one panel at a time.

Cage
Single-story hip roof, bronze frame
Problem
Faded screen, torn roof panels, loose spline
Method
Stripped, channels cleaned, rescreened panel by panel
Finish
Deck swept, old screen hauled off
After pool cage rescreening in Gainesville: tight, dark charcoal screen on every panel of the enclosure Before pool cage rescreening in Gainesville: faded gray screen with torn and sagging panels BeforeAfter
Drag the handle to compare.
Storm damage pool cage repair Gainesville: oak limb lying across torn roof panels of a screened enclosure

Storm Damage Pool Cage Repair in Gainesville

Storm tore your cage? Call us first.

Summer squalls and tropical systems such as Irma (2017) and Idalia (2023) leave Gainesville cages with ripped panels, bent braces and doors that won’t latch. We get you secured and quoted fast.

  • Stay off the cage roof, and keep kids and pets away from bent members and loose screen.
  • Take wide photos before anything is moved. We add our own for your insurer.
  • Storm repairs handle frame first, then screen, so new panels stay tight.
  • Getting ready for the season? Read our hurricane prep for pool cages.

Call (352) 443-5293 Mon–Sat 7am–7pm

Gainesville pool cage rescreen finished: tight charcoal screen panels on a bronze aluminum enclosure under live oak shade Gainesville pool cage repair crew in navy shirts carrying rolls of charcoal screen to a backyard enclosure Gainesville pool cage door with a new self-latching latch set mounted high on the frame

Why Gainesville Picks Our Pool Cage Crew

Honest advice and tight screen.

We’d rather sell you four panels that fix the problem than a full rescreen you don’t need yet.

  • One price, in writing

    Screen, spline, labor and cleanup on one number. If we find something unexpected once panels are off, we talk to you before doing anything extra.

  • Frame first, then screen

    A bent purlin or loose brace gets fixed before new screen goes on, so the panels stay tight.

  • The right screen per wall

    No-see-um where bugs bite, pet screen down low, solar where the sun bakes. Samples on site.

  • Pool and deck protected

    Scraps and old spline are caught, not dropped in the water. The deck gets swept and blown.

  • Punctual crews

    We give you a set arrival window when we book and a heads-up message as the van heads your way.

  • Doors that close right

    Closers, hinges and latches adjusted so the door swings shut and catches every time.

Get a free estimate

Pool Cage Repair Near Gainesville, FL

Across Gainesville and the towns around it.

Aerial view of screened pool enclosures behind Gainesville homes under oak and pine canopy
8 neighborhoods + 4 townsSouthwest to Haile Plantation and Kanapaha, north to Mile Run, Alachua and High Springs.

Pool Cage Repair Gainesville FL FAQ

Questions we hear every week.

How much does pool cage repair cost in Gainesville?

It depends on what failed. A single screen panel usually runs $65–$150, a screen door repair $125–$450 and frame work $250–$2,500. A full rescreen of the whole cage typically falls between $1,800 and $5,500. After we see the enclosure, the price goes on paper and stays put.

Should I replace a few panels or rescreen the whole cage?

If the damage is limited to a handful of panels and the rest of the screen is still flexible and dark, patching makes sense. Once the screen turns gray, feels brittle or tears when you press on it, new panels will sit next to old ones that are about to fail too, and a full rescreen is the better spend.

How long does pool cage screen last in north Florida?

There’s no fixed number. Standard charcoal fiberglass on a well-kept cage commonly goes around a decade, and less on walls that face west or south and take full afternoon sun. Pets, falling limbs and pressure washing shorten that. We’ll tell you honestly how much life your current screen has left.

How long does a full rescreen take?

A typical single-story cage is usually done in one to two days. Large mansard or two-story enclosures can take longer. The pool stays usable once we pack up for the day, and we clean the deck before we leave.

What is spline and do you replace it?

Spline is the rubber cord pressed into the channel of each frame member to hold the screen tight. Old spline shrinks and hardens in the sun, which is why panels pop loose. On a full rescreen every channel gets new spline.

What screen should I pick for my cage?

Most Gainesville cages do well with standard 18/14 charcoal. Choose 20/20 no-see-um screen if biting midges chase you inside at dusk, pet-resistant screen on the lower panels and door if a dog or cat pushes on the walls, and solar screen on the wall that bakes in the afternoon. Mixing types on one cage is common.

Can you fix a cage door that won’t close or latch?

Yes. Most door problems are a worn closer, a loose hinge, a bent frame or a sagging latch plate. If your cage door is part of the barrier around the pool, it should swing shut and latch on its own, so we treat that as a priority.

Will homeowners insurance pay for storm damage to my pool cage?

Sometimes. Many Florida policies cover screen enclosures only in limited ways, and some carry a separate hurricane deductible or exclude screened enclosures altogether. Read your policy or call your agent. We photograph the damage and write up the repair so you have what an adjuster asks for.

Do you repair bent beams and loose braces?

Yes. Bent purlins, loose cross-braces, popped gusset screws and damaged kick plates are part of pool cage frame repair. Frame damage gets fixed before any new screen goes on, since screen stretched over a bent frame will not stay tight.

Do I need a permit to rescreen my pool enclosure?

Swapping screen on an existing frame is generally treated as a repair. Replacing structural members or building a new enclosure can require a building permit from the City of Gainesville or Alachua County, depending on where you live. We check what applies to your address before we quote.

Can you clean or repaint a faded or mildewed cage frame?

Yes. We wash the frame and screen with a soft method that won’t blow out the panels, then repaint the aluminum if the finish is chalky or peeling. It’s often scheduled right before or after a rescreen so the whole cage looks new.

Do I need HOA approval for a rescreen?

Many communities around Gainesville, including larger ones like Haile Plantation, have architectural review rules. Like-for-like screen replacement is often simple, but a change in screen color or a switch to privacy screen may need a request. We can give you a written scope and screen samples to submit.

Does someone have to be home while you work?

No, as long as the side gate is open, pets are shut indoors and the estimate is signed. You get a message when the crew pulls up and pictures of the finished cage before we leave.

How far outside Gainesville do you travel for pool cage work?

Every part of Gainesville. Our neighborhood pages cover Haile Plantation, Kanapaha, Oakmont, Tioga, Jonesville, Huntington, Mile Run and Brywood, and our town pages cover Newberry, Archer, Alachua and High Springs.

Free Pool Cage Estimates in Gainesville

Torn panels or a sagging door? Let’s take a look.

Call now Free estimate